JezK

Edit File: Makefile.inc

# Copyright (C) 2016 and later: Unicode, Inc. and others. # License & terms of use: http://www.unicode.org/copyright.html ## -*-makefile-*- #****************************************************************************** # Copyright (C) 1999-2014, International Business Machines # Corporation and others. All Rights Reserved. #****************************************************************************** # This Makefile.inc is designed to be included into projects which make use # of the ICU. # CONTENTS OF THIS FILE # 1). Base configuration information and linkage # 2). Variables giving access to ICU tools # 3). Host information # 4). Compiler flags and settings # 5). Data Packaging directives # 6). Include of platform make fragment (mh-* file) ################################################################## ################################################################## # # *1* base configuration information and linkage # ################################################################## # The PREFIX is the base of where ICU is installed. # Inside this directory you should find bin, lib, include/unicode, # etc. If ICU is not installed in this directory, you must change the # following line. There should exist $(prefix)/include/unicode/utypes.h # for example. prefix = /usr exec_prefix = /usr libdir = /usr/lib64 libexecdir = /usr/libexec bindir = /usr/bin datarootdir = ${prefix}/share datadir = /usr/share sbindir = /usr/sbin # about the ICU version VERSION = 67.1 UNICODE_VERSION = 13.0 # The prefix for ICU libraries, normally 'icu' ICUPREFIX = icu PACKAGE = icu LIBICU = lib$(ICUPREFIX) # Static library prefix and file extension STATIC_PREFIX = s LIBSICU = lib$(STATIC_PREFIX)$(ICUPREFIX) A = a # Suffix at the end of libraries. Usually empty. ICULIBSUFFIX = # ICULIBSUFFIX_VERSION is non-empty if it is to contain a library # version. For example, if it is 21, it means libraries are named # libicuuc21.so for example. # rpath links a library search path right into the binaries. ## mh-files MUST NOT override RPATHLDFLAGS unless they provide ## equivalent '#SH#' lines for icu-config fixup ENABLE_RPATH = NO ifeq ($(ENABLE_RPATH),YES) RPATHLDFLAGS = $(LD_RPATH)$(LD_RPATH_PRE)$(libdir) endif #SH## icu-config version of above 'if': #SH#case "x$ENABLE_RPATH" in #SH# x[yY]*) #SH# ENABLE_RPATH=YES #SH# RPATHLDFLAGS="${LD_RPATH}${LD_RPATH_PRE}${libdir}" #SH# ;; #SH# #SH# x[nN]*) #SH# ENABLE_RPATH=NO #SH# RPATHLDFLAGS="" #SH# ;; #SH# #SH# x) #SH# ENABLE_RPATH=NO #SH# RPATHLDFLAGS="" #SH# ;; #SH# #SH# *) #SH# echo $0: Unknown --enable-rpath value ${ENABLE_RPATH} 1>&2 #SH# exit 3 #SH# ;; #SH#esac # Name flexibility for the library naming scheme. Any modifications should # be made in the mh- file for the specific platform. DATA_STUBNAME = data COMMON_STUBNAME = uc I18N_STUBNAME = i18n LAYOUTEX_STUBNAME = lx IO_STUBNAME = io TOOLUTIL_STUBNAME = tu CTESTFW_STUBNAME = test ### To link your application with ICU: # 1. use LDFLAGS, CFLAGS, etc from above # 2. link with $(ICULIBS) # 3. optionally, add one or more of: # - $(ICULIBS_I18N) - i18n library, formatting, etc. # - $(ICULIBS_ICUIO) - ICU stdio equivalent library ICULIBS_COMMON = -l$(ICUPREFIX)uc$(ICULIBSUFFIX)$(ICULIBSUFFIX_VERSION) ICULIBS_DATA = -l$(ICUPREFIX)$(DATA_STUBNAME)$(ICULIBSUFFIX)$(ICULIBSUFFIX_VERSION) ICULIBS_I18N = -l$(ICUPREFIX)$(I18N_STUBNAME)$(ICULIBSUFFIX)$(ICULIBSUFFIX_VERSION) ICULIBS_TOOLUTIL = -l$(ICUPREFIX)tu$(ICULIBSUFFIX)$(ICULIBSUFFIX_VERSION) ICULIBS_CTESTFW = -l$(ICUPREFIX)ctestfw$(ICULIBSUFFIX)$(ICULIBSUFFIX_VERSION) ICULIBS_ICUIO = -l$(ICUPREFIX)io$(ICULIBSUFFIX)$(ICULIBSUFFIX_VERSION) ICULIBS_OBSOLETE = -l$(ICUPREFIX)obsolete$(ICULIBSUFFIX)$(ICULIBSUFFIX_VERSION) ICULIBS_LAYOUTEX = -l$(ICUPREFIX)lx$(ICULIBSUFFIX)$(ICULIBSUFFIX_VERSION) ICULIBS_BASE = -L$(libdir) # for icu-config to test with ICULIBS_COMMON_LIB_NAME = ${LIBICU}${COMMON_STUBNAME}${ICULIBSUFFIX}${ICULIBSUFFIX_VERSION}.${SO} ICULIBS_COMMON_LIB_NAME_A = ${LIBICU}${COMMON_STUBNAME}${ICULIBSUFFIX}.${A} # ICULIBS is the set of libraries your application should link # with usually. Many applications will want to add $(ICULIBS_I18N) as well. ICULIBS = $(ICULIBS_BASE) $(ICULIBS_I18N) $(ICULIBS_COMMON) $(ICULIBS_DATA) # Proper echo newline handling is needed in icu-config ECHO_N=-n ECHO_C= # Not currently being used but good to have for proper tab handling ECHO_T= ################################################################## ################################################################## # # *2* access to ICU tools # ################################################################## # Environment variable to set a runtime search path # (Overridden when necessary in -mh files) LDLIBRARYPATH_ENVVAR = LD_LIBRARY_PATH # Versioned target for a shared library FINAL_SO_TARGET = $(SO_TARGET).$(SO_TARGET_VERSION) MIDDLE_SO_TARGET = $(SO_TARGET).$(SO_TARGET_VERSION_MAJOR) # Access to important ICU tools. # Use as follows: $(INVOKE) $(GENRB) arguments .. INVOKE = $(LDLIBRARYPATH_ENVVAR)=$(libdir):$$$(LDLIBRARYPATH_ENVVAR) $(LEAK_CHECKER) GENCCODE = $(sbindir)/genccode ICUPKG = $(sbindir)/icupkg GENCMN = $(sbindir)/gencmn GENRB = $(bindir)/genrb PKGDATA = $(bindir)/pkgdata # moved here because of dependencies pkgdatadir = $(datadir)/$(PACKAGE)$(ICULIBSUFFIX)/$(VERSION) pkglibdir = $(libdir)/$(PACKAGE)$(ICULIBSUFFIX)/$(VERSION) ################################################################## ################################################################## # # *3* Information about the host # ################################################################## # Information about the host that 'configure' was run on. host = x86_64-redhat-linux-gnu host_alias = x86_64-redhat-linux-gnu host_cpu = x86_64 host_vendor = redhat host_os = linux-gnu # Our platform canonical name (as determined by configure) # this is a #define value (i.e. U_XXXX or XXXX) platform = U_LINUX ################################################################## ################################################################## # # *4* compiler flags and misc. options # ################################################################## AR = ar # initial tab keeps it out of the shell version. ARFLAGS := $(ARFLAGS) #SH#ARFLAGS=" ${ARFLAGS}" CC = gcc CPP = gcc -E CFLAGS = CPPFLAGS = -I$(prefix)/include CXXFLAGS = -std=c++11 CXX = g++ DEFAULT_MODE = dll DEFS = -DPACKAGE_NAME=\"ICU\" -DPACKAGE_TARNAME=\"International\ Components\ for\ Unicode\" -DPACKAGE_VERSION=\"67.1\" -DPACKAGE_STRING=\"ICU\ 67.1\" -DPACKAGE_BUGREPORT=\"http://icu-project.org/bugs\" -DPACKAGE_URL=\"http://icu-project.org\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DSIZEOF_VOID_P=8 -DHAVE_LIBM=1 -DHAVE_ELF_H=1 -DHAVE_DLFCN_H=1 -DHAVE_DLOPEN=1 -DHAVE_GETTIMEOFDAY=1 -DHAVE_LIBPTHREAD=1 -DHAVE_INTTYPES_H=1 -DHAVE_DIRENT_H=1 -DHAVE_WCHAR_H=1 -DSIZEOF_WCHAR_T=4 # use a consistent INSTALL INSTALL = $(SHELL) $(pkgdatadir)/install-sh -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} LDFLAGS = $(RPATHLDFLAGS) LIBS = -lpthread -lm LIB_M = LIB_VERSION = 67.1 LIB_VERSION_MAJOR = 67 MKINSTALLDIRS = $(SHELL) $(pkgdatadir)/mkinstalldirs RANLIB = ranlib RMV = rm -rf SHELL = /bin/sh SHLIB.c= $(CC) $(DEFS) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) -shared SHLIB.cc= $(CXX) $(DEFS) $(CPPFLAGS) $(CXXFLAGS) $(LDFLAGS) -shared U_IS_BIG_ENDIAN = 0 includedir = /usr/include infodir = /usr/share/info localstatedir = /var mandir = /usr/share/man oldincludedir = /usr/include program_transform_name = s,x,x, sharedstatedir = /var/lib sysconfdir = /etc INSTALL-L = ${INSTALL_DATA} # for derivative builds - don't bother with VERBOSE/NONVERBOSE SILENT_COMPILE SILENT_COMPILE=$(1) #M# ICU_MSG=@echo " $(1) " #M# ################################################################## ################################################################## # # *5* packaging options and directories # ################################################################## # The basename of the ICU data file (i.e. icudt21b ) ICUDATA_CHAR = l ICUDATA_NAME = icudt67l # Defaults for pkgdata's mode and directories # The default data dir changes depending on what packaging mode # is being used ifeq ($(strip $(PKGDATA_MODE)),) #SH# if [ "x$PKGDATA_MODE" = "x" ]; #SH# then PKGDATA_MODE=dll #SH# fi endif #SH# case "$PKGDATA_MODE" in ifeq ($(PKGDATA_MODE),common) #SH# common) ICUDATA_DIR = $(pkgdatadir) ICUPKGDATA_DIR = $(ICUDATA_DIR) #SH# ;; else ifeq ($(PKGDATA_MODE),dll) #SH# dll) ICUDATA_DIR = $(pkgdatadir) ICUPKGDATA_DIR = $(libdir) #SH# ;; else #SH# *) ICUDATA_DIR = $(pkgdatadir) ICUPKGDATA_DIR = $(ICUDATA_DIR) #SH# ;; endif endif #SH# esac GENCCODE_ASSEMBLY = -a gcc ################################################################## ################################################################## # # *6* Inclusion of platform make fragment (mh-* file) # ################################################################## # The mh- file ("make fragment") for the platform is included here. # It may override the above settings. # It is put last so that the mh-file can override anything. # The selfcheck is just a sanity check that this makefile is # parseable. The mh fragment is only included if this does not occur. ifeq (selfcheck,$(MAKECMDGOALS)) #M# selfcheck: #M# @echo passed #M# else #M# include $(pkgdatadir)/config/mh-linux endif #M#